Category Archives: Uncategorized

Do you call a plumber to fix a hot water heater?

water heater repair

What would cause a hot water heater to stop working?

When it comes to hot water heater repair and plumbing issues, the best professionals to call are those trained for the job. Specifically, you will find plumbers best prepared for the job at  Wicked Plumbing in Somerset, MA. When it comes to hot water coming out of your faucets and showers among other systems, plumbers are the best professionals to call for the job.  

As it pertains to the problems that hinder a water heater in its ability to do its job, there is more than one problem that may arise. The answer to the question actually depends on if the water heater is electric or gas. In an electric water heater, the most common request for water heater repair can include: 

  • Blown fuse 
  • Thermostat
  • Malfunctioning heating element
  • Hot and cold connections improperly crossed

For an electric hot water heater, when the problems are not necessarily encountered then a reset of the system is a common answer to the dilemma. Common problems in gas hot water heaters tend to be:

  • Gas supply
  • Gas valve
  • Thermocouple
  • Pilot light

In the case of the gas water heater, one can similarly reset the system. Being a gas system, it is not as reliant on electricity as an electric water heater is. Either way, when you need repairs for your hot water heater, Wicked Plumbing is the team to carry it out. Call (508) 272-1196 to schedule your service today.

Can a water heater be repaired?

A water heater can certainly be repaired, generally depending on what is going on when a plumber is called out for water heater repair. As per the common problems listed above, the general consensus for these tends to be a parts replacement, a reset of the system, or a flush of your water heater. Like any other system in your home, a gas or electric water heater is made up of several parts. Sometimes one may be faulty or is exposed to harsher use and burns out more quickly. The thermostat and piping tend to be the primary examples, with the thermostat sometimes needing to sync up with the system properly or having been improper of installation. Piping, however, is something slightly different. Often the piping in a home is not switched out when a new water heater is inserted it links up with the piping. The piping can age and clog, which plumbers can figure out easily with specialized tools. 

When it comes to flushing your water heater, you will need to do it once to twice a year. This is because in a water heater sediment will build up and if left alone can cause serious problems for a homeowner. By a professional’s suggestion, a homeowner should do it more than once a year to once every few months. The reason that is said is that it largely depends on a person’s mineral content in their water.

Can you still use water if water heater is leaking?

To put it bluntly, you should never use your hot water heater when it is leaking. Generally, water heaters leak because of sediment build-up. This is because the sediment is making the normal pressure build-up and process is made much harder by the imbalance the sediment brings. The subsequent problems that happen when sediment builds up lead to the steel tank cracking and rusting over time. Generally, when a person finds a leak in their hot water heater, water heater repair will not do the trick and a replacement is absolutely necessary. 

This is why you should absolutely flush your hot water heater every so often to prevent this issue. When you find even a small leak from your hot water heater, it can become a far larger and more expensive issue. If not tended to immediately by a plumber, a small leak will turn into a replacement.

water heater repair

What are the signs your hot water heater is going out?

As mentioned to this point, there are occasions like leaking that leads a plumber to believe it is time to replace your water heater instead of applying water heater repair. The issues that lead professionals to this mode of thinking are not just limited to leaks but also several other issues not found in an efficiently functioning system like:

  • Incompatible with current needs: When you cannot get hot water effectively or it just will not provide enough.
  • Advanced age: Most water heaters last around six to 13 years, breaking down in between these points if not just after.
  • Heavy amount of noise: When sediment builds up in your hot water heater, it can make it loud and annoying to deal with. 
  • Rust in water: When you find rust in your water, generally looking dirty or forms a coating at the bottom of the glass, that’s an indication your hot water is no longer healthy to consume. 

Normally, your plumber will give you an indication when you need to replace your hot water heater so you can prepare for it. The best way to know is to have your plumber commit to water heater repair and inspections every year if not more frequently. When you need plumbing services, call (508) 272-1196 today to schedule yours with Wicked Plumbing.

Is Hydronic Heating Efficient?

What is a Hydronic Heating System?

Sometimes you will enter a home it is climate controlled, but not by vents or anything visible to you. Some homeowners in Somerset, MA as well as across the nation use what is called hydronic heating. Hydronic heating systems water, oil, or steam to heat the home it is installed in. Notable hydronic systems some homeowners or future homeowners are familiar with are the floor heating systems that are often applied to bathrooms and rooms in the house. Also including gas boilers and radiators, hydronic heating systems are considered efficient compared to other systems. 

The definite lack of electricity use is often what attracts homeowners into getting the systems installed among other reasons as well. While a homeowner may expect to see normal heating, ventilation, and air conditioning system work harder as the seasons progress, hydronic systems are different in that regard. Whereas common damages occur due to the HVAC system overworking to cool or heat the home, hydronic systems operate in a way that does not have that particular problem. To that extent, if your water line and electricity work, then the overall hydronic system will operate smoothly. When owning a home in Somerset, MA, why not call Wicked Plumbing for hydronic system repair or installation. Call (508) 272-1196 today to schedule your appointment for the service.

What are the Benefits of Hydronic Heating?

Hydronic systems have multiple impressive benefits to them that are not found in normal HVAC systems like heat pumps or other traditional options. While the system takes more time to fully acclimate the home to the desired temperature, it does so in a fashion that can more efficiently be sustained for longer periods of time. In general, the benefits one would find in this system and not in others include:

  • Cuts allergies out: With either dispersing water droplets into the air or using an underfloor system, homeowners will not need to worry about allergens in the air 
  • No dry out: Normal heaters dry the air and cause a multitude of problems for skin and the body in general, this is not seen in hydronic heaters. 
  • Energy efficiency: With water easily being superior at transferring heat, boilers and underfloor heaters use less electricity to start up and maintain the heating process. 

The upfront issue that comes with the hydronic system, especially the underfloor option, is the price of installation. While a boiler tends to be an easier installation, the underfloor option has to be installed under your flooring, which means an entire removal and then reapplication. This means if you want a hydronic underfloor system and you have marble tiles, the tiles would need to be removed and then reinstalled. That is why the installation or replacement process tends to be recommended when the homeowner is replacing the floor in a home.

How Long Does Hydronic Heating Last?

Hydronic systems are accredited with having a relatively comfortable lifespan of 15 to 20 years. In the case of underfloor heating or radiant heating, the system lasts many years longer than most other hydronic and even HVAC systems. With a working lifespan of 35 years, most homeowners tend to agree in saying the system is worth the upfront installation cost when it can last them for so long. By comparison, while it can exceed the 35-year lifespan, a normal heater like a furnace will only last up to 20 years. When it comes to the cost, the hydronic system will differ in pricing depending on what system in a home. The underfloor system does not break down as often as other systems, but when it does and it is under the floor the cost may be more because the floor has to be removed to get to the problem. When it is a normal boiler, the general repairs tend to be equal to an HVAC system.

Is Hydronic Heating More Efficient Than Forced Air?

While the lowest costing heaters may be infrared and oil-filled heaters, they tend to not be as efficient or applicable to an entire home. Arguably two of the most popular and used heaters come in the form of hydronic heaters versus forced air. Forced air heaters are generally what is found in normal heating, ventilation, and air conditioning systems. While a heating system like a heat pump can be considered forced air to some degree, they are more expensive than hydronic heating due to having to work harder in the colder and hotter times of the year. A determining factor between which system is better tends to be the age, with older systems always being less efficient than a new system. Furthermore, as mentioned the hydronic system tends to be more efficient in constant running and the cost that shows up on the monthly energy bill. For when you have a boiler or other water-based plumbing system, reach out to Wicked Plumbing to get the best plumbing services in Somerset, MA. Call (508) 272-1196 today to schedule your appointment for hydronic heating systems services.

Can a Mini Split Heat a Whole House?

A Woman Turns on Mini Split Heating System.

Can a mini split heat a whole house?

If you are thinking about having a mini split heating system installed in your home, the big question you’ll want to know is, “Can a mini split heat a whole house?” These systems are often used as supplemental heating, but they are also capable of heating a whole house. Most new mini split systems have high-efficiency components and advanced features that make them as powerful as standard duct systems. They will be able to meet the demands required of heating and cooling a whole home. Of course, as with other systems, you have to make sure the heating system you install is large enough to manage your whole home. If you install too small of a system, you’ll run into serious problems, including excessive wear and tear on components that will lead to early replacement. If you are looking for experts at installing and maintaining mini split heating systems in Somerset, MA, the team to turn to is the one at Wicked Plumbing. We can help you with all your heating and cooling as well as plumbing needs. Schedule a service call with us by calling (508) 272-1196.

What is mini split heating and cooling

While most central heating systems require a system of ducts to move air through the house, a mini split system is ductless. With a mini split system, you can control temperatures in individual rooms, which can save you on utility bills. These systems are made up of two components, an outdoor compressor/condenser and an indoor air handling or evaporator unit. They are easy to install because they aren’t attached to ductwork. Instead the indoor and outdoor units are linked by a single conduit housing everything from the communication cables to the copper tubing and drain lines. They can be used as a primary heat source or as a supplemental source.

How does a mini split heating system work

Mini split heating systems are force-air systems like central heating, only they require no ducts to circulate the air whether heating or cooling. They essentially function like a cross between heat pump and a window unit. When they are working as an air conditioner, they draw warm air from inside and push it outside. When it heats, it draws cool air from the inside and pushes it outside. Much of the work is performed by the air handlers inside the home. They contain the evaporator coils and blowers like other heating systems. The rest of the work is done by an outdoor unit which houses the compressor/condenser. 

How efficient are mini splits for heating?

Mini split heating systems are highly energy efficient. They use 60% less energy than standard HVAC systems. One reason they are so efficient is that individuals manage the temperature in each room of the home. You only need to heat or cool the areas you want to heat or cool. Because they are so efficient, you can cut costs by as much as 30%.

How long do mini splits last?

Not only is mini split heating energy efficient, it also has a long lifespan. With proper maintenance, a mini split can last up to 20 years, much better than the 12 to 15 years that a standard system lasts. Again, as with a regular system, you have to take care of the system properly with regularly scheduled maintenance.

Mini split heating in cold climate

Mini split heating is perfect for a cold climate like Somerset, MA. While they are more common in warmer climates, the mini split will still work well in a cold climate. That’s because, believe it or not, warm air exists even on the coldest day.

Best mini split for heating

While there are many mini split heating systems on the market today, several brands and models consistently get high reviews. Among the best include:

  • LG Multi VS
  • Friedrich J Series
  • Fujitsu General Halcyon
  • Daikin MXS Series
  • Mitsubishi MXZ Series

Why is my mini split not heating?

Of course, as with standard systems, mini split heating systems will have problems from time to time, especially if it isn’t properly cared for. One thing to check is to see if the system is set for heating. These systems do not automatically set for heating or cooling. You will need to manually switch the system. The temperature setting also needs to be set 10 degrees higher than the indoor temperature. You may also have a problem with the 4-way valve that manages the refrigerant flow in the system. If you’ve tested other issues, this may be the problem. The valve may need to be repaired or replaced. Other problems that may occur causing the heat to not come on include refrigerant leaks, or a component like the blower motor has gone out. Consult with a professional anytime you have a problem with your system.

Outdoor Unit of Mini Split

Should a mini split run all the time?

Unlike central heat and air, mini split heating tends to run for a long time when switched on. This is usually normal for the system as it adjusts the air temperature in the home. Often, the system is not running at full capacity because the temperature is adjusted. 

If you have mini split heating in Somerset, MA and you think it may be malfunctioning or you just want to get it serviced, the team to reach out to for repair or replacement is the one at Wicked Plumbing. We provide a wide range of heating and plumbing solutions. Call us today at (508) 272-1196 for assistance.

How Do Hydronic Heating Systems Work?

The concept of hydronic heating with radiators and a boiler. Underfloor heating

Learn More About Hydronic Heating

There are many types of heating systems and perhaps the most used outside of the US would be hydronic heating. Essentially, these heating systems use radiant heating which will typically heat underneath floors or other areas for cozy room temperatures. Essentially these systems are easy on the pocket after the installation as they won’t require as much maintenance and energy to operate. They are easy to control with thermostats and have a number of benefits that make them a superior choice to regular central duct HVAC systems. If you’d like to learn more about hydronic heating contact your local HVAC company for more information. Here is some useful general information regarding hydronic heating that may provide clarification.

What is a hydronic heating system?

Hydronic heating is a simple heating system that essentially heats water and has it move throughout the property through a system of small sealed pipes that connect to radiators or boilers. 

Is hydronic heating gas or electric?

Hydronic heating will use a heat source to heat the water and uses a thermostat to control temperatures. The heat source can be solid fuel, gas, electric or LPG.

Is hydronic heating energy efficient?

Hydronic heating is definitely more energy efficient as they are more often designed to work with the structure by working with tubes where water flows under the floor. Water, in general, is a better heat transfer medium than air.

Should a hydronic heating system be flushed?

Yes, as a matter of fact, hydronic heating won’t really require any other maintenance besides flushing periodically (if initial installations were done correctly that is.) It should be flushed to remove solder and flux that could mix with water. 

How do you maintain a hydronic heating system?

Hydronic heating won’t require too much maintenance if the initial installation was done correctly. First, make sure that it’s done by a pro as wrongdoings can lead to a list of ongoing issues. Only a certified plumber should be maintaining the system to ensure proper compliance. Check the boiler or furnace for deposits or rust. A power flushing once a month or at the very least yearly should be done to avoid that issue and to prevent corrosion and maintain a proper pH balance.

How much pressure is in a hydronic heating system?

Hydronic heating with a boiler shouldn’t run over 12-15psi and only have enough pressure to raise the water a few feet above the highest area of the pipe system. For example, a 12psi will lift water 28’ above the fill valve while a 15 psi will lift water to 34’.

How long does hydronic heating last?

Hydronic heating should be able to last 15-20 years. The life span will depend largely on the quality of the products used during installation or with routine maintenance and proper initial installation methods.

Underfloor heating with collector and radiator in the room. Concept of technology heating. The order of layers in the floor.

What are the benefits of hydronic heating?

  • Energy Efficiency: Tip, it can be set to a lower temp for better energy efficiency.
  • Versatile: You can zone it only to the rooms being used.
  • Reduced Energy Costs: Can cost as few as a few dollars monthly.
  • Radiant Heat: Ability to warm items in the room which in turn heat the room.
  • Healthy: Doesn’t use fans that contribute to circulating dust, pollen, allergens.
  • Low Maintenance: Few moving parts that could go bad, only needs routine power flushing.
  • Safe: People can touch it without risking burns as water temps. are mild.
  • Quiet: No fans, no hum.
  • Earth Friendly: Advanced technology with quality European designs.
  • Reliable: Set the thermostat upon installation and seldom have maintenance.
  • Flexible: Suitable for all kinds of properties including refitting and new builds.
    • It can be extended or altered at any time.
    • It can be tailored to fit an individual’s needs.
  • Variety of Heating Sources: Solar or heat pumps are the most efficient options with off-peak electricity and gas being more economical heat sources.

How much does it cost to install hydronic heating system?

Hydronic heating will cost around $2,539-$3,060 per unit. Labor and supplies are necessary for the unit’s installation so you may see costs of labor. Normally this will take 12 hours so a range for labor costs could be from $695-$875.

Is hydronic heating cheap to run?

Hydronic heating will cost a lot at the beginning with installations yet they make up significant savings in the long term due to very low maintenance and high energy efficiency. Hydronic heating is estimated to be about 35% more cost-effective than a central ducted heating system.

Get in Touch With a Professional HVAC Professional

When you’re interested in a hydronic heating system reach out to a professional HVAC company for assistance. Only a professional will be able to get you the help that you need that will match your particular property specifications. Hydronic heating is a great way to implement an energy-efficient and streamlined method of heating your property. Implement this enjoyable heating system today for a more relaxed interior lifestyle.

If you’re interested in hydronic heating in Somerset, MA call (508) 272-1196 with Wicked Plumbing!

How Do I Know if My Drain is Clogged?

clogged drain in bathroom

Why Is My Drain Clogged

There is potentially no worse feeling than trying to flush a toilet or run the garbage disposal only to find out nothing is draining. When there are issues with the drains in your home, minor issues can quickly turn into major problems without any warning. That’s why if you are starting to notice any kind of drainage issue, contact Wicked Plumbing as soon as possible. We can help with a clogged drain in Somerset, MA or any of the surrounding areas. Contact us at (508) 272-1196 for reliable services today. 

snaking clogged drain

What Causes a Clogged Drain

What can actually cause a drain to become clogged? Believe it or not, there are several things that can happen or get lodged in your pipes which can lead to clogs. How do you know if there is a clog? That’s a great question. The most obvious indication of a clog is a slow-moving drain. Water isn’t draining as quickly as it once was, which could mean something is blocking the flow of water.  

  • Hair: One of the most common items to clog your drains is hair. It can easily build up and collect with other items. The best way to prevent this one from creating problems is by installing drain guards which can catch the majority of this culprit. 
  • Dirt: While the majority of your pipes are meant to direct water and waste away from the home, they are only so big. If you are washing yourself or a pet off with large chunks of dirt, it can easily get lodged and stuck, causing a clog.
  • Food Waste: In the kitchen, it can be easy to think that the garbage disposal will just take care of everything. However, if your disposal is older or smaller than your needs, it may not be able to effectively process everything into a size small enough to drain away. 
  • Mineral Build-Up: Homes with hard water may be more likely to experience than homes that have had a water softener installation. The minerals in hard water can build up over time, resulting in blocks and clogs. 
  • Tree Roots: While it can’t be easily cleaned away, another common cause of clogged drain is actually tree root infiltration. Tree roots can grow around and into your mainline causing water flow irregularities, clogs, blocks, and more. 

One of the biggest questions we get asked is, can a clogged drain cause a leak? The answer is, yes. If enough pressure builds up, it can result in a leak. A way to combat that is by installing a water softener or investing in a water filtration installation. These steps will help to remove a big cause of the problem, mineral build-up. 

How to Clean a Clogged Drain

If you do find a clog in one of your drains, you may be wondering what to do next. While you can look up how to clean a clogged drain on your own, it’s important to note that nothing will be as effective as professional cleaning. More than that, nothing will be as safe as a professional cleaning. A clogged drain cleaning cost will be more expensive than what you can do on your own – initially. If something goes wrong during a DIY project, you may end up paying more money on repairs and replacement services. Rather than take that risk, rely on Wicked Plumbing to help. We are the leading professionals for all things plumbing and drain cleaning. Connect with us today for more.

Frequently Asked Questions

  • How much does it cost to clean a clogged drain?
    • Depending on where the clogged drain is, the cost will vary. Kitchen and bathroom drain cleaning services will run you about $100 to $200 in total. Cleaning a laundry drain will be about the same, but a toilet drain cleaning can cost up to $300 in total. 
  • How do you clean a drain?
    • There are several different ways to clean a clogged drain. Rarely will plumbers recommend over the counter drain cleaners, instead suggesting hot water, vinegar, and other less aggressive options. You can always rely on a plumber to get the job done efficiently. 
  • What causes a drain to become clogged?
    • Several things can build up and cause clogged drains. In the kitchen, pieces of large food, grease, sediment, dirt, and other items can easily build-up resulting in a blockage. In bathrooms, it can be because of hair, sediment, soap products, and other clogging items. 
  • What can I pour down a drain to unclog it? 
    • You can pour hot water, vinegar, and or a mixture of the two. Do not pour liquid drain cleaners down your pipes. These products aren’t the most effective at removing clogs. More than that, they can seriously damage and eat away at your plumbing. 
  • How do you know you have a clogged drain?
    • There are several signs to pay attention to. The most obvious sign is usually a slow-moving drain. If it appears to be taking longer for water to drain, something is likely blocking the flow of water. Another obvious sign could be bad smells coming from drains.
clogged drain cleaned and moving faster

Connect With Us Today for More

Rely on Wicked Plumbing when you need help with a clogged drain in Somerset, MA. Dial (508) 272-1196 to get started. 

How Do You Know When To Replace Your Water Heater?

Plumber With Clipboard Looking At Electric Boiler

Learn More About Water Heater Repair

Your water is an essential unit in your home or business that requires annual maintenance, inspection or at the very least a check-up to make sure that it’s working properly and in good condition. With the many different makes, models and options out there troubleshooting water heater repair solutions will differ from unit to unit. What’s more, the behavior of your water heater will differ whether it is tankless or not. It’s important to realize that many units that are tankless will not run into common water heater repair problems often associated with water heaters. Make sure before you decide to install a new water heater that you go through the many changes made with water heaters from energy-efficient units, tankless units and more as most maintenance and issues can be resolved with the improvements made with newer units. As with everything be sure to contact a professional if you have any questions or concerns for your water heater repair. Here is some useful information regarding water heater repair in the meantime.

How much does it cost to repair water heater?

Water heater repair cost has a range of costs between $244 to $576 when hot water heaters are broken. The average cost of water heater repair is $483. In order to avoid high repair costs, it’s important to conduct annual inspections to catch problem areas before they progress to bigger issues and therefore higher repair costs. 

Can a water heater be repaired?

Water heater repair is possible depending on the type of water heater that’s being repaired. With tanks, certain conditions aren’t reversible such as tank corrosion or rust. But like all machines areas of damage can be localized and parts repairs may be the simple repair solution necessary to get the unit back into steady performance. It’s important to know what type and model you have as each model ill have different courses of action for water heater repair.

Water Heater Repair vs Replace

Water heater repair will typically involve issues that can be fixed with parts repairs or replacements such as with crossed hot and cold connections or a faulty heating element or thermostat. A full-on water heater replacement will lie with irreversible issues like tank corrosion, an undersized water heater in comparison to property connections, rust, build up or a generally aged unit.

What would cause a hot water heater to stop working?

Your water heater can stop with its normal performance and functions for a variety of reasons, the most common having to do with tank buildup and corrosion that typically comes along with the behaviors present with old age. Another reason why your hot water heater may have stopped working is with a blown fuse or tripped circuit breaker. For the case of a blown fuse, it’s best to contact an electrician for replacement, in the case of a tripped circuit you may try resetting it before activating your hot water heater once more. 

Do plumbers fix hot water heaters?

Water Heater Repair Plumber or ElectricianYour water heater repair will most typically be repaired by a plumber unless problems are originating with any wiring like with a blown fuse in which case an electrician may be the one to call.

Repairman Connects Wires to Electric Boiler & Thermostat

What are the signs of a hot water tank going bad?

Signs You Need Water Heater Repair

  • Odd Sounds
  • Unusual Water (Discolored, Sediment, etc.)
  • Low Hot Water Pressure
  • Fluctuating Water Temperatures
  • Leaking

How many years does a water heater last?

Commonly a water heater can last between 8 to 12 years depending on the maintenance that’s imparted on the unit and general care and upkeep. As of such, you may start to see signs of an aging unit close to the 10-year mark. When repairs and issues with your units are repetitive it may be time to replace your water heater unit. In order to prolong the life of your unit and ensure proper water quality be sure to have an annual inspection conducted with a professional plumber.

Contact A Professional

When you’re running into any issues with your water heater that may cause a need for water heater repair be sure to contact your local plumber. Only with a professional will you be able to select localized heater repair solutions that best match with your particular unit. You’ll also be able to schedule annual maintenance and check-ups to ensure that your water heater will reach its full life expectancy as well as catch problems before they arise to bigger issues. For other issues with your home like with roof repairs be sure to contact the service professionals local to you. Get in touch with your local plumber to set up an appointment for water heater repair today.

If you’re interested in water heater repair in Somerset, MA call (508) 272-1196 with Wicked Plumbing! 

Why is water quality important?

Water Quality is an Essential Part of Life

We have all heard the term “water quality” before but might not necessarily understand just what it means. In a vague sense, we all understand that it means having cleaner water to drink and use, but past that vague description, we might not be as educated about it as we need to be.

When talking about water quality, there are a number of different things that you should be aware of and questions that you should be asking. Here are a few things that you should be aware of when dealing with water quality.

Why is water quality important?

Water quality is important for a few reasons. The first is that we need water for our very survival. Water is an essential portion of our lives, both for drinking and cooking purposes. Having drinking water that is contaminated and unclean can lead to health effects that can be small in nature all the way up to death. Having clean drinking water cannot be understated.

It is also worth noting that less than 3% of the planet’s water is potable and available. That is a lot of water across the globe that is totally unusable for consumption. So it is important that the water that is available is clean and free of contaminants.

What are the 6 indicators of water quality?

Temperature and dissolved oxygen. Water temperature is important because it has an effect on the rest of the variables in the quality of water. As water temperature increases, the overall solubility of the oxygen within will begin to decrease. Essentially it is the hotter the water, the less oxygen that is in it. This is an important thing to keep in mind.

Conventional variables. Knowing what other things are in the water is an important aspect. This is why water is often checked by its pH levels. The pH measurement will take stock of any contaminants in the water and just how it could affect anyone who drinks it. A rating of 7 is neutral and anything below 4.5 or above 9.5 is usually lethal to organisms in the water. They can also have effects on biological processes like reproduction. Knowing the pH levels is essential to getting clean water.

Metals. What may surprise you is that there are many metals that are in different sources of drinking water. This isn’t a bad thing, necessarily: metals like zinc, copper, and manganese can help in the biochemical process that sustains life. But they can also be severely toxic to aquatic organisms if they are delivered in higher concentrations.

Nutrients. Depending on where you get your water from, you can find a litany of different nutrients in the water. Phosphorus is one of the most common nutrients and depends greatly on the climate. It is important to know which nutrients are in the water and in what concentration.

Industrial Chemicals. Polychlorinated biphenyls (PCBs) are chemically stable compounds that are produced for a variety of different commercial and industrial applications. Despite the fact that they were banned in 1977, they are still found in plasticizers as well as electrical wire insulation.

There are also things like Dioxins and furans that have organochlorine compounds that are also found in the air and soil in small doses. It is important to know the level of these industrial chemicals and what effect these have on the overall quality of the water that you are consuming.

Hydrocarbons. Most drinking water will contain a number of different compounds called hydrocarbons. Things like PAHs, naphthenic acids, and other human sources can become introduced into the water supply. Knowing the effects that these can have in different concentrations can go a long way towards getting towards a cleaner, clearer water quality.

How is water quality measured?

There is a litany of factors that come into play when determining the overall quality of the water that we are aiming to consume. Things like pH levels and turbidly are important to know but there are others that are measured against federal mandates. This is important because we have to know what is in our water due to the possible effects that they can have.

The Environmental Protection Agency works in coalition with other municipalities to ensure that tap water throughout the United States is safe to consume. The EPA is most often responsible for delegating responsibility for drinking water standards to the various states and tribes throughout the country.

Water filtration systems are becoming all the more popular to help ensure that our drinking water is clean and clear. Calling the professionals at Wicked Plumbing install or repair those systems is one of the best moves that you can make. We don’t just handle water heaters and clogged drains; we do it all.

Call us today at (508) 272-1196 to schedule your appointment with us today.